Leave a message

Тhank you!

We will contact you as soon as possible.

bg en sr ro gr uk ru


Water Water hoses

Fuel Oil and fuel hoses

Ducting Ducting hoses

Air hoses Air hoses

Food and beverage hoses Food and beverage hoses

Acid and chemical hoses Acid and chemical hoses

Welding hoses Welding hoses

Hot water and steam hose Hot water and steam hoses

Automotive and boat hoses Automotive and boat hoses

Material handling hoses Material handling hoses

Cable protection hoses Cable protection hoses

Multipurpose hoses Multipurpose hoses

Stainless steel hoses Stainless steel hoses

Peristaltic pump hoses Peristaltic pump hoses

Criogenic hoses Criogenic hoses

PTFE hoses PTFE hoses

Garden hoses Garden hoses

Agricultural hoses Agricultural hoses

New hoses New hoses


Often searches

Discharge and suction hoses Discharge and suction hoses

Oil resistant hoses Oil resistant hoses

Abrasive resistant hoses Abrasive resistant hoses

Ventilation hoses Ventilation hoses

Gas hoses Gas hoses



SLM VAPOR HOSE  Suitable for dispensers with active vapour recovery. Design and technical details see overleaf. Resistant to petrol and ozone, low diffusion.
SHANNON 85 Steel cord hose used for concrete placement at casting locations; it is used at the end of the pumps to distribute the concrete. The hose resists suction during the cleaning process. Usually supplied with swaged on “Full flow” hardened couplings.
Light and flexible lorry collecting hose suitable for milk and milk byproducts with an improved resistance to higher pressure.
Designed for dispensing metered quantities of automotive fuels from dispensing equipment (petrol pumps). Resistant to leaded and unleaded petrol (gasoline) with an aromatic content not exceeding 50 %.
Hose construction
Tube: Black, smooth, NBR rubber compound, antistatic (R < 1 M­/m)
Reinforcement: Synthetic textile yarns providing low dilation. Built-in copper wires to allow electrical continuity between fittings
Cover: Black, smooth, non-staining and antistatic (R < 1 M­/m) CR rubber compound resistant to abrasion, oil, fuel and weathering.
Hose temperature range
-25°C to +55°C
According to EN 1360 Type 1

Oil and fuel hose CARBOPRESS® D EN 1360/1

• Electrical continuity guaranteed by copper wires if correctly assembled
• Designed for petrol pumps
• Suitable for diesel and gasoline
• Burst Pressure Value 4:1

Number ID OD WP BP Weight R min
mm mm bar bar kg mm
IH30502403/80 15 25 16 48 0,45 75
IH30502420/50 16 26 16 48 0,47 80
IH30502420/90 16 26 16 48 0,47 80
IH30502421/80 18 30 16 48 0,64 90
IH30502407/50 19 31 16 48 0,63 95
IH30502411/50 21 31 16 48 0,53 105
IH36521140/40* 25 37 16 48 0,74 150