Leave a message

Тhank you!

We will contact you as soon as possible.

bg en sr ro gr uk ru


Water Water hoses

Fuel Oil and fuel hoses

Ducting Ducting hoses

Air hoses Air hoses

Food and beverage hoses Food and beverage hoses

Acid and chemical hoses Acid and chemical hoses

Welding hoses Welding hoses

Hot water and steam hose Hot water and steam hoses

Automotive and boat hoses Automotive and boat hoses

Material handling hoses Material handling hoses

Cable protection hoses Cable protection hoses

Multipurpose hoses Multipurpose hoses

Stainless steel hoses Stainless steel hoses

Peristaltic pump hoses Peristaltic pump hoses

Criogenic hoses Criogenic hoses

PTFE hoses PTFE hoses

Garden hoses Garden hoses

Agricultural hoses Agricultural hoses

New hoses New hoses


Often searches

Discharge and suction hoses Discharge and suction hoses

Oil resistant hoses Oil resistant hoses

Abrasive resistant hoses Abrasive resistant hoses

Ventilation hoses Ventilation hoses

Gas hoses Gas hoses



SLM VAPOR HOSE  Suitable for dispensers with active vapour recovery. Design and technical details see overleaf. Resistant to petrol and ozone, low diffusion.
SHANNON 85 Steel cord hose used for concrete placement at casting locations; it is used at the end of the pumps to distribute the concrete. The hose resists suction during the cleaning process. Usually supplied with swaged on “Full flow” hardened couplings.
Light and flexible lorry collecting hose suitable for milk and milk byproducts with an improved resistance to higher pressure.
Hose POLIAX D SM EN 12115
Suitable for suction and delivery of highly aggressive chemicals, according to EN 12115.
Hose construction
Tube: Black, smooth antistatic EPM nitrosamine free rubber compound
Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in copper wires to facilitate the electrical connection between hose and end couplings
Cover: Black, antistatic (R < 1 M­/m), EPDM rubber compound, heat, abrasion, ageing and weather resistant.
Hose temperature range
-35 °C (-31 °F) to +100 °C (+212 °F) For aggressive chemicals and solvents the hose is intended to be used at room temperature. The hose can be cleaned and sterilized with usual detergents or steam – a temperature of +130 °C (+266 °F) for short periods.
According to
EN 12115

Chemical hose POLIAX D SM EN 12115

• In-plant and storage tank transfer
• Nitrosamine free
• Flexibility and kink resistance
• Suitable for ATEX areas
• Meets TRbF 131 part 2 par 5.5
• Vacuum 0.9 bar up to 63.5 mm then 0.8 bar
• Burst Pressure Value 4:1

Number I.D. O.D. WP BP Weight R min
mm mm bar bar kg mm
IH36810111/40 19 31 16 64 0.70 125
IH36810112/40 25 37 16 64 0.92 150
IH36810113/40 32 44 16 64 1.09 175
IH36810114/40 38 51 16 64 1.35 225
IH36810115/40 50 66 16 64 1.84 275
IH36810116/40 63.5 79 16 64 2.54 300
IH36810117/40 75 91 16 64 3.12 350
IH36810118/40 100 116 12 48 4.41 450