Leave a message

Тhank you!

We will contact you as soon as possible.

bg en sr ro gr uk ru

Hoses

Water Water hoses

Fuel Oil and fuel hoses

Ducting Ducting hoses

Air hoses Air hoses

Food and beverage hoses Food and beverage hoses

Acid and chemical hoses Acid and chemical hoses

Welding hoses Welding hoses

Hot water and steam hose Hot water and steam hoses

Automotive and boat hoses Automotive and boat hoses

Material handling hoses Material handling hoses

Cable protection hoses Cable protection hoses

Multipurpose hoses Multipurpose hoses

Stainless steel hoses Stainless steel hoses

Peristaltic pump hoses Peristaltic pump hoses

Criogenic hoses Criogenic hoses

PTFE hoses PTFE hoses

Garden hoses Garden hoses

Agricultural hoses Agricultural hoses

New hoses New hoses

 

Often searches

Discharge and suction hoses Discharge and suction hoses

Oil resistant hoses Oil resistant hoses

Abrasive resistant hoses Abrasive resistant hoses

Ventilation hoses Ventilation hoses

Gas hoses Gas hoses

 

 

News
SLM VAPOR HOSE
SLM VAPOR HOSE  Suitable for dispensers with active vapour recovery. Design and technical details see overleaf. Resistant to petrol and ozone, low diffusion.
SHANNON 85
SHANNON 85 Steel cord hose used for concrete placement at casting locations; it is used at the end of the pumps to distribute the concrete. The hose resists suction during the cleaning process. Usually supplied with swaged on “Full flow” hardened couplings.
MILKFLEX
MILKFLEX
Light and flexible lorry collecting hose suitable for milk and milk byproducts with an improved resistance to higher pressure.
Hose HYPERLINE SB
Catalog
Hyperline SB is a smoothbore, medium wall premium grade, seamless extruded PTFE Tube with a Grade 304 Stainless Steel Wire Braid. The choice of the PTFE polymer, together with the extrusion, heat treatment and quality control programmes, is designed to produce the best quality PTFE tube possible, ensuring minimum permeation and maximum flexibility. This range of Hyperline SB PTFE hose has been developed for general purpose use. Hyperline SB has a smooth bore, permitting fast, clean fluid flow, but is limited in flexibility and kink resistance, particularly in bore sizes above 1/4”. For flexibility Hyperline V is preferred. For flexibility and flow, Hyperline FX is preferred.
Hyperline SB is available in the following grade
Hyperline SB, SS - Natural PTFE Tube, external 304 Stainless Steel Wire Braid.
Hyperline SB, AS, SS - Antistatic (AS) grade PTFE liner tube
Hyperline SB, DB - Double Braid of Stainless Steel Wire (Hyperline SB, DB).

HYPERLINE SB

Automotive, motorsport, refrigeration, high pressure steam, and many other industrial applications in general, wherever the excellent chemical resistance and temperature resistance of the hose are required.

 

Temperature Rating
The temperature rating is from -70° to +260°C, but the Maximum Working Pressure (MWP) must be reduced by 0.5% for each 1°C above 130°C.
Pressure Resistance
The Pressure Ratings are as listed and adjusted for temperature, for the Stainless Steel grades. If higher working pressures are required, a double braid hose can be requested, to special order.
Full Vacuum Resistance
Hyperline SB is not designed for vacuum resistance, and Hyperline FX is more suitable for such applications. The smaller sizes of Hyperline SB may be fully or partly vacuum resistant, dependent upon the application conditions.
Diffusion Resistance
Hyperline SB is not designed for High Pressure Gas applications (above 140 Bar or 2000 psi). A specially processed hose design is required. For advice, consult OPW market.

 

Assembly
Assembly of Hyperline SB to standard Hydraulic End Fittings, together with Ferrules supplied by OPW market is straightforward
HYPERLINE SB

Number
Size Type DN PTFE
thickness
O.D. R min WP Weight Max length
inch   mm mm mm mm bar кг m
  70-400-03-01-02 3/16” SS 5.0 0.76 7.65 45 230 0.078 1200
  70-410-03-01-02 AS,SS 5.0 0.76 7.65 45 230 0.078 1200
  70-400-04-01-02 1/4” SS 6.7 0.76 9.30 60 205 0.110 800
  70-410-04-01-02 AS,SS 6.7 0.76 9.30 60 205 0.110 800
  70-400-05-01-02 5/16” SS 8.5 0.76 11.10 70 180 0.136 600
  70-410-05-01-02 AS,SS 8.5 0.76 11.10 70 180 0.136 600
  70-400-06-01-02 3/8” SS 10.0 0.76 12.75 80 180 0.166 400
  70-410-06-01-02 AS,SS 10.0 0.76 12.75 80 180 0.166 400
  70-400-08-01-02 1/2” SS 13.6 0.76 16.35 130 140 0.210 220
  70-410-08-01-02 AS,SS 13.6 0.76 16.35 130 140 0.210 220
  70-400-10-01-02 5/8” SS 16.6 0.84 19.50 163 110 0.280 200
  70-410-10-01-02 AS,SS 16.6 0.84 19.50 163 110 0.280 200
  70-400-12-01-02 3/4” SS 19.8 1.00 22.50 180 95 0.327 -
  70-410-12-01-02 AS,SS 19.8 1.00 22.50 180 95 0.327 -
  70-400-16-01-02 1” SS 26.4 1.00 30.10 230 80 0.524 -
  70-410-16-01-02 AS,SS 26.4 1.00 30.10 230 80 0.524 -