Leave a message

Тhank you!

We will contact you as soon as possible.

bg en sr ro gr uk ru


Water Water hoses

Fuel Oil and fuel hoses

Ducting Ducting hoses

Air hoses Air hoses

Food and beverage hoses Food and beverage hoses

Acid and chemical hoses Acid and chemical hoses

Welding hoses Welding hoses

Hot water and steam hose Hot water and steam hoses

Automotive and boat hoses Automotive and boat hoses

Material handling hoses Material handling hoses

Cable protection hoses Cable protection hoses

Multipurpose hoses Multipurpose hoses

Stainless steel hoses Stainless steel hoses

Peristaltic pump hoses Peristaltic pump hoses

Criogenic hoses Criogenic hoses

PTFE hoses PTFE hoses

Garden hoses Garden hoses

Agricultural hoses Agricultural hoses

New hoses New hoses


Often searches

Discharge and suction hoses Discharge and suction hoses

Oil resistant hoses Oil resistant hoses

Abrasive resistant hoses Abrasive resistant hoses

Ventilation hoses Ventilation hoses

Gas hoses Gas hoses



SLM VAPOR HOSE  Suitable for dispensers with active vapour recovery. Design and technical details see overleaf. Resistant to petrol and ozone, low diffusion.
SHANNON 85 Steel cord hose used for concrete placement at casting locations; it is used at the end of the pumps to distribute the concrete. The hose resists suction during the cleaning process. Usually supplied with swaged on “Full flow” hardened couplings.
Light and flexible lorry collecting hose suitable for milk and milk byproducts with an improved resistance to higher pressure.
Hyperline FX is unlike any other PTFE hose product currently available. The PTFE liner tube is smooth bore on the inside but convoluted on the outside, to combine the ease of assembly and high flow rates of a smooth bore hose with the flexibility and kink resistance of a convoluted hose in one product! Hyperline FX is designed to be used in place of Smoothbore Hose when improved flexibility is required, and to replace Convoluted Hose when improved flow characteristics or easier assembly is required.
Hyperline FX is available in the following grades
Hyperline FX, TO - Natural PTFE Tube Only, no braid.
Hyperline FX, AS, TO - Antistatic Black PTFE Tube Only, no braid.
Hyperline FX, SS - Natural PTFE Tube external 304 Stainless Steel Braid.
Hyperline FX, AS, SS - Antistatic Black PTFE Tube, external 304 Stainless Steel Braid.
Hyperline FX, AM - Natural PTFE Tube, Polyaramid Fibre Braid.
Hyperline FX, AS, AM - Antistatic Black PTFE Tube, Polyaramid Fibre Braid.
Hyperline FX special order - Hyperline FX can also be supplied with a Polypropylene Braid, or with a Stainless Steel braid with an EPDM or Silicone Rubber Cover, or a PVC, Nylon or other Plastic Cover, printed if required.


Our revolutionary new product. A natural or *antistatic PTFE tube with a smooth bore, but externally convoluted. Supplied with a Stainless Steel (SS) wire braid or a Black Polyaramid Fibre braid (AM).


Temperature Rating The temperature rating is from -70° to +260°C, but the Maximum Working Pressure (MWP) must be reduced by 1% for each 1°C above 130°C. The maximum working temperature for the Polyaramid Fibre braided hose is +180ºC.
Pressure Resistance
The maximum working pressures are as listed, up to 130°C (266°F). The design of a conventional autoconvoluted PTFE hose liner permits internal “pressing out” of the convolutions inside the braid over time, and under temperature and pressure, leading to premature failures. The narrow and highly compressed web sections of Hyperline FX are much more resistant to pressing out, hence a much longer service life under pressure can be achieved. Tube Only grades can only be used at pressures up to 4 Bar (60 psi) up to 130°C (266°F) and are not fully vacuum resistant.
Full Vacuum Resistance
Stainless Steel braided Hyperline FX hose is fully vacuum resistant up to 130°C .
Reduced Diffusion Rates
The way the Hyperline FX tube liner is made, by web compression without fracture, surprisingly generates a much improved resistance to gas permeation, compared to any other type of smooth bore or convoluted PTFE hose. Much lower diffusion rates can therefore be achieved.
Excellent Flow Rates
Due to the non-turbulent flow through a smooth bore hose, Hyperline FX flow rates for a given pressure drop and actual bore size are 2 to 3 times higher than for a convoluted PTFE hose. (This applies to the hose itself. If end fittings are applied, however, which introduce a smaller bore at the ends, this multiple is reduced). The “whistling” noises created by the turbulent flow of gases or steam through convoluted hose are eliminated in Hyperline FX.
Excellent Internal Cleanability
Internal cleanliness and self-drainability are optimised by the smooth bore design. This eliminates ‘pockets’ of fluid trapped in internal convolutions when using convoluted hose.


Problems associated with assembling fittings to convoluted hoses, such as leakages, the need for special or sleeved spigots, the need to de-convolute etc disappear – Hyperline FX is literally as easy to assemble as any smooth bore hose. Details concerning the Assembly Instructions.


- Automotive and Motorsport - replacing conventional PTFE hoses in ESP systems, fuel systems, braking systems and oil lines.
- Refrigeration : refrigerant feed lines to freezer plates, where the high resistance to permeation, together with the flexibility and chemical resistance, are primary advantages.
- Steam and Gas Lines : where the smooth bore ensures nonturbulent gas flow, leading to noise free operation at higher flow rates, and longer service life.
- Industrial applications in general where the ease of assembly to end fittings together with the higher flow rates, chemical and temperature resistance and resistance to permeation make Hyperline FX the optimum choice.
- Not suitable for use in applications requiring PTFE Lined and Flared End Fittings - for such applications only Bioflex is suitable.

Size Type I.D. O.D. O.D.
of braid
R min WP BP
inch mm mm mm mm bar bar
  92-100-04-01-02 1/4” SS 6.8 9.00 9.6 19 88 580
  92-110-04-01-02 SS,AS 6.8 9.00 9.6 19 88 580
  92-100-04-01-02 AM 6.8 9.00 9.6 38 62 580
  92-110-04-01-02 AM,AS 6.8 9.00 9.6 38 62 580
  92-100-06-01-02 3/8” SS 10.0 12.50 13.5 25 80 520
  92-110-06-01-02 SS,AS 10.0 12.50 13.5 25 80 520
  92-100-06-01-02 AM 10.0 12.50 13.5 50 56 520
  92-110-06-01-02 AM,AS 10.0 12.50 13.5 50 56 520
  92-100-08-01-02 1/2” SS 13.6 16.28 17.5 32 60 380
  92-110-08-01-02 SS,AS 13.6 16.28 17.5 32 60 380
  92-100-08-01-02 AM 13.6 16.28 17.5 64 42 380
  92-110-08-01-02 AM,AS 13.6 16.28 17.5 64 42 380
  92-100-10-01-02 5/8” SS 16.7 20.00 21.0 50 50 360
  92-110-10-01-02 SS,AS 16.7 20.00 21.0 50 50 360
  92-100-10-01-02 AM 16.7 20.00 21.0 100 35 360
  92-110-10-01-02 AM,AS 16.7 20.00 21.0 100 35 360
  92-100-12-01-02 3/4” SS 19.8 23.20 24.1 60 42 350
  92-110-12-01-02 SS,AS 19.8 23.20 24.1 60 42 350
  92-100-12-01-02 AM 19.8 23.20 24.1 120 29 350
  92-110-12-01-02 AM,AS 19.8 23.20 24.1 120 29 350
  92-100-16-01-02 1” SS 26.4 30.30 31.3 73 40 260
  92-110-16-01-02 SS,AS 26.4 30.30 31.3 73 40 260
  92-100-16-01-02 AM 26.4 30.30 31.3 146 28 260
  92-110-16-01-02 AM,AS 26.4 30.30 31.3 146 28 260