|
Home ->
PTFE hoses -> PHARMALINE |
|
|
PHARMALINE
|
 |
The homogeneous hose construction of ELAPHARM where all layers incl. the lining are permanently bonded to each other. This results in a good kink and vacuum resistance and assists durability and flexibility
|
|
HOSE TYPES, DESIGNS & APPROVALS
ELAPHARM electrically isolating ' I ', blue cover. Corresponds to DIN 26055-3, Type A. Homogeneous elastomer hose construction with
smooth, white Teflon® PTFE linerLining - Teflon® PTFE white, permanently bonded with reinforcement, non electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM blue, satin finish, non electrically conductive, FDA conform ** ELAPHARM OHM electrically conductive 'Ω / T', black cover. Corresponds to DIN 26055-3, Type B. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner. Lining - Teflon® PTFE black, permanently bonded with reinforcement, electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM black, satin finish, electrically conductive ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3, Type B. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner. Lining - Teflon® PTFE black, permanently bonded with reinforcement, electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM light grey with OHM conductive stripe, satin finish, electrically conductive. | |
|
FURTHER TECHNICAL INFORMATION
The homogeneous hose construction of ELAPHARM where all layers
incl. the lining are permanently bonded to each other. This results
in a good kink and vacuum resistance and assists durability and
fl exibility.
The FDA-conform PTFE liner is suitable for all commonly used media
in the foodstuff , pharmaceutical and chemical industries. It is easy to
clean and also suitable for highly viscous media.
There is a choice of fi ttings, e. g. free of dead spaces / fl ared, meaning
the PTFE lining fl ared over ends, no entrapment.
Hose assembling to customer specifi cation is done in-house by Elafl ex,
straight from the reel – for a fast delivery of your assemblies.• Clean transfer : hose assemblies for highest media purity requirements • ultra smooth lining of DuPont Tefl on® PTFE • fl exible, homogeneous, kink resistant, pressure and vacuum resistant elastomer hose construction to DIN 26055-3 ( EN standard in preparation ) • FDA / USP Class VI conforming • as ELAPHARM ( non electrically conductive ) or ELAPHARM OHM ( fully electrically conductive ) • nominal bore DN 13 – 50 mm • up to + 150° C, vacuum 0,8 bar, PN 16 CRIMPED END FITTINGS
- Sanitary and Mini Sanitary Triclamp (Triclover) Fittings in 316 SS, with bores electropolished to <0.375μm (<15μin).- I-Line Fittings, Compression Fittings, BSPT & NPT Male, Flanges, Camlocks, DIN11851, RJT, SMS, RJP and others are also available to special order. |   |
|
RELINK END FITTINGS
For ELAPHARM we offer among other the following
coupling types with integrated hose tail.Screw, flange and clamp connections to DIN 32676 ( 'Triclamp' ) DIN 11864 - 1 / -2 / -3 ( 'Aseptic' ) DIN 11853 - 1 / -2 / -3 ( 'Hygiene' ) DIN 11851 ( 'Foodstuff Thread' ) EN 14420-7 ( 'Cam Locking Couplings' ) Flanges e. g. EN 1092-1 Welding Nipples acc. DIN 11866 For pharmaceuticals, biotech media and foodstuff s we suggest the following two systems. Crimping ' free of dead spaces / flared ' Crimped hose coupling, PTFE lining fl ared over ends. Patent pending for process. No entrapment, use for highest media purity requirements. Usually used with DIN 32676 ( Triclamp ) or flanged hose couplings. Crimping ' gap minimised ' Crimped hose coupling with flush-mounted hose tail. No obstruction of inner cross-section, almost no gap or dead volume between lining and hose tail. For high purity requirements. Suitable for all coupling types. |
|
See more | ||||
|
The SiteSentinel® Nano™
Metal expansion joints
Ebsray® Pumps
Abrasion-proof and antistatic hoses
|
